Get Adobe Flash player

Additional Renewable Energy Systems

Given today's concerns about global warming and climate change, a growing number of us are looking to use renewable energy to reduce our carbon footprint. DJK Renewables have a range of energy efficient renewable solutions, designed to generate electricity to meet our everyday requirements, or deliver heat and hot water comfort to our homes, which also reduce harmful greenhouse gases in the process.



Greenstore Combination ground source heat pump

Combination ground source heat pump

Air to air heat pumps for home heating

Air to air heat pump system

Air to air heat pump system

Outside air, even on cold days, contains latent heat which can be converted to provide environmentally friendly, low cost heating for both domestic and commercial properties. Air to air heat pumps operate on a similar principle to an ordinary refrigerator. The air to air heat pump's outdoor unit draws in and warms the outside air by an indoor fan unit and distributes the warm air throughout the property. It is an extremely efficient process which can produce up to 5 times more heat than the electrical energy it uses.

In addition, air to air heat pumps can also operate as an air cooler during warmer months and advanced air purification technology is particularly beneficial to allergy sufferers. Air to air heat pumps are an attractive alternative where external space is limited as they require nothing more than a suitable outside wall, making them ideal for a wide range of property types, including apartments and smaller homes. The indoor unit is designed for quiet operation and the system is operated using a remote control with an easy to read LCD display.

Air to water heat pumps for hot water

Air to water heat pump

Outdoor unit

Air to water heat pumps also operate on a similar principle to an ordinary refrigerator. Heat from the atmosphere is extracted by an outdoor unit and is absorbed by a refrigerant solution which is then compressed to a high temperature. The heat generated is used by the indoor unit to create hot water for a traditional pressurised heating and hot water system.

Air to water heat pumps can provide an outgoing flow temperature of 65°C. However, they are ideally suited for low-temperature underfloor central heating systems and appropriately sized radiators, as well as for baths and showers, providing a low cost solution throughout the year.

The efficiency of all heat pumps is measured as Coefficient of Performance (CoP). This is the amount of energy the heat pump produces compared to the amount of electricity needed to run the pump. For example, a heat pump which uses 1kW of electricity to produce 4kW of usable energy has a CoP of 4 and is therefore 400% efficient.

Ground source heat pumps

When correctly sized, a ground source heat pump can provide all the heating and hot water needs for your home. The ground source heat pump works by drawing on the natural, renewable energy in the ground to deliver low cost, comfortable heating and hot water that uses sustainable energy and causes no direct emissions or other damage to the environment.

Ground source heat pumps work better with the lower water temperatures required by underfloor heating systems, but they can also be used to heat appropriately sized radiators. The heat collector system is installed under the ground around your property. Ground source heat pumps are suitable for both new and refurbished properties with required levels of insulation and can be used with a range of collectors.

Horizontal collector

Bore hole collector

Compact collector

Compact collector

Bore hole collector

Horizontal collector

Bio mass boilers

Wood Pellet Stove

Wood Pellet Stove

Biomass is biological carbon based material derived from living, or recently living organisms such as plants and trees. But biomass can equally apply to both animal and vegetable derived material.

The difference between biomass and fossil fuels is one of time scale. Biomass takes carbon out of the atmosphere while it is growing, and returns it as it is burned. If it is managed on a sustainable basis, biomass is harvested as part of a constantly replenished crop. This maintains a closed carbon cycle with no net increase in atmospheric CO2 levels.

Biomass boilers offer an environmentally sound, heating solution. Burning biomass, such as pellets or logs, emits the same amount of carbon dioxide as is absorbed while the plants were growing. The boilers efficiently extract energy to provide both heating and hot water.

Savings in CO2 emissions are significant - up to 9.5 tonnes per year when a wood boiler replaces a solid (coal) fired system or electric storage heating.

Wind generation

Domestic Wind Turbine

Generate electricity at home with small-scale wind turbines. 40% of all the wind energy in Europe blows over the UK, making it an ideal country for small domestic turbines. Wind turbines harness the power of the wind and use it to generate electricity.

Small systems known as "microwind" or "small-wind" turbines can produce electricity to help power the lights and electrical appliances in a typical home.

The Energy Saving Trust has recently completed the most comprehensive field trial of domestic scale wind turbines to date. The aim of the trials was to provide UK home owners with an indication of whether they would be able to generate electricity from the wind at their home. The data from these trials has been used as the basis for the Domestic Wind Speed Prediction tool.

You can access this tool by clicking here

Low energy lighting

LED Lighting

LED Lighting

In addition to saving the environment, there are further benefits to switching to low energy LED and compact fluorescent lighting:

  • REDUCE energy bills - Up to 94% off running costs
  • REDUCE maintenance costs - LED Lights last +50,000 hours
  • REDUCE air-conditioning costs - LED Lights emit very little heat
  • REDUCE fire risk - LED Lights run at low temperature

DJK Renewables offer energy saving solutions that include evolving technology such as LED for interior down light replacement. LED lighting can also be used for exterior illumination to complete the perfect garden without the worry of running costs when hosting that important garden party or family BBQ.

For commercial applications, DJK provide energy saving control systems, energy saving light fittings such as compact fluorescent high frequency lighting and direct / indirect luminaries.

Off grid photovoltaic smart lights for remote locations

Off Grid Remote Lighting

Store Electrical Charge

Looking for bright ideas to get power into hard to reach or remote buildings and locations?

With increased public awareness of renewable energy products, DJK as MCS (Micro Certification Scheme) approved installers offer the design and installation of ‘Off Grid’ Solar PV systems for both domestic and commercial applications.

  • No grid power connection required
  • Light to remote buildings and locations (sheds, garages, stables, toilet blocks, log stores etc.)
  • No electricity bills
  • No servicing required, fit and forget
Remote Barn Lights

Off Grid Remote Lighting

Rainwater harvesting - save money by saving water

RainSava System

RainSava Domestic System

The RainSava system offers the perfect solution for preserving and utilising a natural resource: rainwater. The RainSava Residential rainwater harvesting and rainwater collection system offers a sustainable, eco-friendly alternative to public water supply for non-potable household use.

Harvesting rainwater has significantly increased in popularity in recent years, with the growing recognition that water is a precious and finite commodity. Rainwater offers a sustainable environmental alternative to mains water for all non-potable uses. The collection of rainwater can also reduce surface water around the home and may offer a storm water management solution.

Nature delivers an abundant supply of soft rainwater directly to your property. The roof, gutters and downpipes all act as an inbuilt collection system. RainSava then filters out leaves and debris from this natural resource and stores it in an underground tank. This water can then be pumped into the home for use in non-potable applications such as washing machines, toilet-flushing, watering the garden and washing the car.

  • Sustainable solution for water use
  • Save up to 50% on mains water usage and consequent reduction of water bills
  • Ensures low visual impact on your property
  • Low power requirements

Save money - use your PV array to generate free hot water!

Solar iBoost System

Solar iBoost Control

Its Clever but Simple!

Solar iBoost utilises the power generated from your solar PV array during the day to heat your hot water using your own immersion heater, in preference to exporting the power to the grid. Thereby, no expensive grid power is used to power the immersion heater. The savings in lower gas/oil fuel bills will be far greater than the export rate if metered. Typical payback is achieved in less than 4 years and the system will not affect your Feed-In tariff payments.

Clever software controls the operation of Solar iBoost, so that energy diverted to heat your hot water is adjusted automatically to the amount of electricity generated from your PV array. A consistent minimum level of PV output is required before switch on and PV power to the immersion heater is limited to ensure no grid power is consumed unnecessarily. Your hot water will be heated in about 8 hours and a manual override, indicated by an LED switch, is provided for manual control.

Power saving through voltage optimisation

V-Phase Logo

DJK Renewables are an accredited installer for VPhase. By reducing and managing the voltage coming into your home, a VPhase device will ensure many of your electrical appliances use less electricity and cost less to run.

Most electrical equipment manufactured for Europe and the UK is rated at 220V and may indeed operate at an even lower voltage. One of the reasons power optimisation is so effective is that the average voltage supplied from the National Grid is 242V although it can be as high as 253V), whereas the nominal voltage is 230V. So, in most cases, you are being supplied more voltage than you need and you're paying for it, whether you want it or not. There is nothing to be gained by operating equipment at a voltage higher than it was designed for; quite the contrary as over-voltage will significantly reduce the life expectancy of most equipment. Power optimisation will therefore also reduce maintenance costs.

The VPhase unit manages voltage to a stable level, normally 220V in the UK, regardless of the incoming supply voltage. Savings will vary and are dependent on incoming voltage and individual devices. Testing by VPhase on fridges and freezers shows a saving of 17%, 15% on normal light bulbs and 10% on energy saving light bulbs. One digital cordless phone showed an extraordinary saving of 44%. Further savings can be made on washing machines, tumble driers, dishwashers, televisions and numerous other electrical appliances across the whole house. Typically, whole house savings are in the region of 10% - which means, household electricity bills will be around 10% less each year. VPhase Voltage Optimisation is a fit and forget solution that once installed will operate silently and unobtrusively, lowering and stabilising household voltage, saving money, reducing CO2 emissions and preventing energy waste.